DJI BS100 Intelligent Battery Station
Every enterprise flight programme lives or dies by battery turnaround. The DJI BS100 answers that challenge with a single rugged unit that charges, stores and transports the entire power complement of a DJI Matrice 400. Load it with TB100 flight batteries and WB37 batteries, choose a charging mode to match your turnaround and noise requirements, and roll it from the vehicle to the launch point on its 360° wheels — no separate chargers, cases or carts required.
One Hub for Charging, Storage and Transport
The DJI BS100 is a one-stop solution built around the realities of enterprise operations. It holds and charges up to three TB100 / TB100C flight batteries and two WB37 batteries, with an additional USB-C port for charging accessories. Between missions it doubles as protective storage, and when it is time to move, the integrated 360°-movement wheels let one person reposition a fully loaded station without lifting.
Charge a TB100 in as Little as 45 Minutes
Downtime is the enemy of productivity. On a 220 V supply in Fast Charging Mode, the DJI BS100 takes a TB100 from 0% to 100% in approximately 45 minutes; on 110 V it completes the same cycle in about 70 minutes. High-power delivery — up to roughly 2184 W at the TB100 port — means batteries are ready almost as quickly as crews can cycle them, keeping the Matrice 400 in the air across long inspection, mapping and public-safety deployments.
Four Charging Modes for Every Situation
The station adapts to the job. Ready-to-Fly Mode charges to 90% for the fastest possible turnaround, while Standard Mode tops batteries up to a full 100%. Fast Charging Mode prioritises speed when minutes matter, and Silent Mode keeps acoustic output as low as 36 dB — quiet enough for hospitals, residential areas, film sets and night operations where noise is a constraint. Matching the mode to the mission helps balance turnaround speed against battery longevity.
Move It Anywhere on 360° Wheels
A fully loaded battery station is heavy, and the DJI BS100 is designed to move with you. The new 360°-movement wheels allow smooth, multi-directional transport and tight turns, so transitions between the vehicle, the staging area and the launch point are effortless — even over the uneven ground typical of field deployments.
Built for Demanding Field Operations
A wide 100–240 V AC input lets the BS100 run from mains power or a field generator, and an operating range of -20°C to 40°C covers most deployment climates. Intelligent power management and built-in protection against overcharging, overheating and power irregularities safeguard both the batteries and the station, making it a dependable backbone for professional Matrice 400 fleets. Full manufacturer specifications are published on the official DJI Matrice 400 support page.
Technical Specifications
| Model | BS100 |
| Dimensions | 605 × 410 × 250 mm (L×W×H) |
| Net Weight | Approx. 11.8 kg |
| Supported Batteries | TB100 Intelligent Flight Battery, TB100C Tethered Battery, WB37 Battery |
| Charging Channels | Up to three TB100 and two WB37 batteries (sequential); one TB100 and one WB37 simultaneously, plus one USB-C port |
| Charging Modes | Ready-to-Fly Mode (90%); Standard Mode (100%); supports Fast Charging Mode and Silent Mode |
| Charging Time (TB100 / TB100C, 0–100%) | 220 V: 45 min (Fast) / 110 min (Silent) · 110 V: 70 min (Fast) / 110 min (Silent) |
| Noise (Silent Mode) | As low as 36 dB |
| Input | 100–240 V (AC), 50–60 Hz, 10 A |
| Output — TB100 Port | 100–110 V: approx. 1185 W; 110–180 V: approx. 1474 W; 180–240 V: approx. 2184 W |
| Output — WB37 Port | 100–240 V: approx. 52 W |
| Output — USB-C | 5 V / 9 V / 12 V / 15 V 3 A, 20 V 3.25 A (up to 65 W) |
| Operating Temperature | -20° to 40° C (-4° to 104° F) |
| Compatibility | DJI Matrice 400 |
What’s in the Box
- BS100 Intelligent Battery Station × 1
- AC Cable (Universal) × 6
- AC Cable (Korea) × 1
- AC Cable (China) × 1
